A fire rated door system
safe today, safe tomorrow

The Solidcor R30 Fire Door System -FD30s is a maintenance free, Third Party certificated doorset. It has been Fire tested, smoke tested, weather tested, security tested (PAS24) and endurance tested.

The Solidcor R30 Fire Door System results from a journey of listening. A journey that started by listening to the wish-list of a highly respected London Housing Association with a 40,000 plus property portfolio. Architect led, the Housing Association asked for a fire rated doorset designed to assist the less able using the Rutland door closer with slide arm and controlled closing and latch action. The door closer was to be fitted overhead out of reach of children’s fingers to reduce risk associated with finger trap injuries. The entire doorset must be fire tested using multipoint locks, and identical doorsets security tested to PAS 24. The system must be low maintenance due to limited budget, and returning to the days of decorating costs associated with painted doors and frames was not an option. This wish-list is now reality with the R30 Fire Door System.

After extensive investment in excess of £500,000 you can rely on a system that is tested to the limits. EN 1634 fire tested dual orientation, PAS 24 security, smoke and performance – Solidcor are committed to raise the bar with a system underpinned by UKAS approved third-party certification.

If you’re the responsible person under the Regulatory Reform (Fire Safety) Order and likely to be held accountable, this reliable system provides due diligence to help you demonstrate best practice. In short, designed to help you sleep at night. Solidcor Fire Door System gives consistency in fire safety and security.

Approved Document L (ADL) provides guidance on how to meet the building regulations on the conservation of fuel and power. The Solidcor R30 solid timber core door leaf and R30 solid timber core frame assembly is tested in accordance with BS EN ISO 10077-1:2017 and meets U-Rating requirements for external front entrance doors on existing dwellings of under 2.0W/m²K and 1.8 W/m²K for new build dwellings.

#SafeTodaySafeTomorrow

Compliance fire and performance testing

R30 Fire Door System is independently and successfully tested by UKAS accredited bodies to the following standards:

✔ Dual Certification – Doorsets certificated and supplied to the same specification for fire, smoke and security performance

✔ Complete Doorset “supplied complete with all essential parts from a single source…” as defined in BS EN 12519

✔ EN 1634-1 Fire tested bi-directionally – as required in Building Regs Approved Doc B (ADB)

✔ Third-party Certification for Fire & Smoke

✔ ISO 9001 & Factory Production Control System

✔ Traceability back to one source

✔ EN 1634-3 Smoke Tested

✔ PAS 24:2016 Security Tested & Dual Certified – required in Approved Document Q (ADQ) for Security in Dwellings

✔ Secured by Design accredited

✔ BS 6375-2 Mechanical strength tested including soft & heavy body impact, hard body impact, load bearing

✔ BS EN 1191 & BS EN 12046-1 tested to resistance to repeated opening & closing

✔ BS 6375-1 Weathertightness tested in accord with BS EN 1027:2000

✔ BS 6375-1 Air permeability tested in accord with BS EN 1026:2016

✔ BS 6375-1 Resistance to wind load in accordance with BS EN 12211:2016

✔ EN ISO 10077 Choice of U-Rating from 1.3, 1.8 and 2.0 W/m²K – as required in Building Regs approved document L (ADL)

✔ Assists BS 8300 (formerly DDA) accessibility as defined in the Equalities Act – as required in Building Regs approved document M (ADM)

Why this system?

✔ Highly durable against weather, vandalism and crime
✔ 10 year guarantee on the frame and slab
✔ 5 year guarantee on the hardware
✔ Solid timber core door leaf and frame for consistent fire protection
✔ Maintenance free
✔ Glazing options and styles
✔ Exclisive door furniture
✔ Tested to the highest standards and third party certificated